The Industrial Blend resin is a resin for DLP or SLA 3D printers: it is a special formulation for industrial applications. Industrial Blend can withstand very low and very high temperatures (tested from -45˚C to 225˚C)- suitable for any test environment. This also makes the Industrial Blend Resin one of the only resins that has been used for vulcanisation.
The Industrial Blend resin works with any light source with a wavelength of 225nm to 415nm – this means there is no need to modify DLP 3D printers. Industrial Blend resin also work reliably with some models of SLA 3D printers.
When fully cured the Industrial Blend resin has a hardness of approximately 75 shore D. Industrial Blend resin has also been tested and proven to withstand a myriad of different chemicals including water, acetone, alcohol and thinner. Find out more here.
We DO NOT recommend that this product is used in Formlabs printers or copies of, as this is a very reactive resin - we cannot be held responsible for any damage caused if you choose to ignore this note.
We have been informed by the chemists at head office that the industrial blends may not maintain the high temperature properties when used with the new LED style printers.
The resin was designed for printers with light engines that produce light with a wide UV range, this gave the resin its high temperature properties. However with the new LED style printers the UV range is very narrow and whilst it cures the resin and makes stable prints, it does not cure the resin to the same degree giving it the high temperature properties.
1 kg bottle (1 ltr approx)
MSDS data sheet
Designed for laser 3D printers
Dental resin high & low reactivity
Excellent all round resin